SUP-DC2000 Liquid analyzing meter turbidity transmitter
Nephelometers and turbidimeters work by shining a light source, usually a laser or LED, through a sample of water and measuring the amount of light that is scattered or absorbed by the particles in the water.
Characteristics
Range: pH: (0～14)pH
ORP:(-2000～2000)mV
DO:(0～40)mg/L
TDS: (0～600)mS/cm
Turbidity: (0～4000)NTU
Suspended solids: (0～120000)mg/L
Output signal: 4~20mA; Relay; RS485
Power supply: AC：(100～240)VAC; DC：24VDC(Optional)
SUP-DC2000 Liquid analyzing meter turbidity transmitter is a general-purpose water quality controller. It is suitable for use with McFlow multiple water quality series digital sensors. It is used to monitor water quality parameters including pH, ORP, conductivity, dissolved oxygen, turbidity, sludge concentration, etc.
- Isolating transmitting output, with little interference.
- Isolating RS485 communication.
- EC/TDS measurement, temperature measurement,
- top/bottom limit control, transmitting output, RS485 communication.
- Configurable manual and auto temperature offset function.
- Configurable upper/lower limit warning and delay.
- Configurable hummer and LCD backlight switch.
- Addition of universal password.
- Industrial controlled door keep, to avoid instrument halted.
| Product | Liquid analyzing meter turbidity transmitter |
|---|---|
| Model | SUP-DC2000 |
| Dimension | 100mm*100mm*150mm |
| Range |
pH: (0-14) pH ORP: (-2000-2000) mV DO: (0-40) mg/L TDS: (0-600) mS/cm Turbidity: (0-4000) NTU Suspended solids: (0-120000) mg/L |
| Relative humidity | (10~85)% |
| Temperature range | (0 ~ 60)°C |
| Communication | RS485, Modbus-RTU |
| Signal output | 4-20mA, maximum loop 500Ω, 0.2%FS |
| Power supply |
AC: (100-240)VAC DC: 24VDC (Optional) |
| Relay output | 250VAC, 3A |
